GPR Plus Reader
The GPR Plus provides
the basic PIT tag reader function of reading and transmitting the
identification code contained within a PIT tag. The black thumb-actuated
power On/Read button activates the reader. A message “SEARCHING...” alerts the
user that the reader is scanning for a tag within range. Once a tag is
detected, an audible beeper along with the ID number in decimal format is displayed on the screen that alerts the user that the
tag was successfully scanned.
Power is provided to the GPR Plus through 7.2VDC NiMH
rechargeable batteries or AAA alkaline batteries. The NiMH rechargeable
batteries can be recharged using the detachable USB cable with an external wall
adapter. A message "LOW BATTERY" alerts the user that the reader
needs to be recharged or batteries replaced.
The GPR Plus has a 3000 tag code memory capacity and includes a
time/date stamp with each tag read. The memory is easily downloaded using
Biomark Tag Manager™ (see page 7) or BioTerm (see page 8).
Wireless communication capability is provided to the GPR Plus
through its Bluetooth® module. A Bluetooth visual indicator provides
information about the wireless communication status.
Once a tag is detected, the tag is automatically transmitted via
this channel.
The GPR Plus comes with a Windows® based PC utility program
called GPR Plus Software which can be used to configure the
reader and is available to download on our website. GPR Plus Software.
The memory is downloaded using Biomark Tag Manager™ (see page 7)
or BioTerm (see page 8). The GPR Plus comes with a combined USB battery
charger/communication cable, rechargeable NiMH batteries, test tag and Quick
Start Guide. Full user manual is available for download on our website.
Note: The GPR Plus is NOT WATERPROOF. Please use the Aquapac
provided when in use. Store the reader out of the Aquapac in a dry environment
when not in use. Condensation will cause permanent non-warranty covered damage
to the circuitry in the reader.
Dimensions: 20 x 8 x 3 cm. 330 gm